One-stop-solution for machine vision products.
Mstar Technologies, Inc, as a leading provider of a comprehensive Machine Vision System in China, was founded in March 2012, located in Zhejiangoverseas High-Level Talents Innovation Park. Mstar Technologies, Inc, is a company engaged in the area of development and production of machine vision products including machine vision system, industrial camera, FA lenses, machine vision lightings, infrared thermal cameras and etc..
Home / All / Vision System / Image Dimension Measurement System /
Image Dimension Measurement System | Instant Measurement
Home / All / Vision System / Image Dimension Measurement System /
Image Dimension Measurement System | Instant Measurement
Find Your Product
Whatever your requirements, our know-how, expert team, and technology are all there, ready to provide you with the precise, fully-tailored solution you need.
-
Please send your message to us
- Tel
- *Title
- *Content
Image Dimension Measurement System | Instant Measurement
Detail Information
An automated, instant optical measurement system
OM-1100
An automated, instant measurement system that provides highly accurate and repeatable measurement data in seconds; simply place a part on the stage and push one button! Hundreds of critical features can be dimensioned on the part anywhere within the system's field of view. Built in automatic edge detection software allows for measurements to remain consistent among all operators and eliminate subjectivity. This user friendly tool can be used by anyone to compliment your quality control processes whether it is being used in a lab or out on the shop floor.
Conventional Measurement Tools VS OM-1100 Instant Measurement System
Common Problems with Dimensional Measurements
Conventional Measurement Tools such as optical comparator, measuring microscope, caliper, micrometer, etc., have some common problems like slow measuring speed, easy to introduce human error, tedious operation steps and high learning cost.
optical comparator
measuring microscope
caliper
micrometer
SLOW
■ Adjusting complex fixtures for part placement and datum setup is
time consuming
■ Manual measurement, limited energy
■ Data management and creating inspection reports can be tedious
INCONSISTENT
■ Different lighting methods or lighting types results in inconsistent
measurements
■ Different position of the parts results in inconsistent measurements
■ Measurements rely heavily on operator judgment and experience
COMPLICATED
■ Learning how to operate the measuring instrument takes time
■ Dimensions requiring virtual lines or points add a layer of complexity
The advantages of OM-1100 Image Dimension Measurement System
Place-and-Press Measurement
FAST
■ Automatic recognition of position and orientation
■ No time consuming positioning work or datum setup required
■ Automatically saves measurement data and creates inspection
reports
CONSISTENT
■ Visual focus can easily reproduce the same lighting conditions
■ Automatically identifies the position of the parts
■ The simple place-and-press operation means consistent
measurement results regardless of the operator
EASY
■ Easily set up measurements with just a few clicks
■ Setting up virtual lines and points is just as simple
FAST
Automatically saves measurement results
It can not only do the "OK/NG" judgment to the measurement
results, but also automatically saves the measurement results and creates inspection reports.
CONSISTENT
Equipped with a specifically designed optical lens with a large depth of field
Large DOF: Parts locates within the depth of field can be correctly measured.
Large FOV: It allows parts which is placed within the field of view to be measured accurately in a short time.
EASY
Automatic Recognition of Position and Orientation
The location and orientation of the part placed on the measurement stage are automatically detected. No need for precise positioning of the part.
Parameters
|
Model No. |
OM-1100 |
|
Dimension(mm) |
561*291*645 |
|
Load
weight(kg) |
3kg |
|
Lens |
Telecentric
lens |
|
WD(mm) |
120 |
|
Camera |
5.0 MP CMOS |
|
Field of
View(mm) |
Φ100 |
|
Measurement
accuracy (μm) |
≤ 5μm |
|
Repeatability(μm) |
≤ 1μm |
|
Stage moving
range(mm) |
45 |
|
Light |
Ring light and
Telecentric illumination |
|
Software |
HCVision 7.1 |
|
Working
enviroment |
Indoor
temperature (best temp.: 23℃ ±2℃ ); Humidity
30-80%； Vibration
<0.002g lower than 15Hz |
Drawings (Unit: mm)
Application Area
OM-1100 can be used in 3C industry, pharmaceutical industry, medical apparatus and instruments, automobile manufacturing industry, hardware industry, semiconductor industry, agriculture and food, cosmetics, packaging and so on.
Gasket
Metal parts
Gear
Watch parts
Semiconductor circuit
Mobile phone parts
Springs
Medical instruments
Pills
Download
Review
- Loading...
Mstar Technologies, Inc, as a leading provider of a comprehensive Machine Vision System in China, was founded in March 2012, located in Zhejiangoverseas High-Level Talents Innovation Park. Mstar Technologies, Inc, is a company engaged in the area of development and production of machine vision products including machine vision system, industrial camera, FA lenses, machine vision lightings, infrared thermal cameras and etc..